For Information on FCC Certifications, CE Mark or International Approvals

Contact CSIA: (503) 482 9289 or e-mail us at quotes@csiassoc.com

International Type Approval and Safety Approval

May 2021

Effective May 6th, 2021, the new technical regulations on the energy labelling of space heaters, combination heaters, packages of space heater, temperature control, and solar devices and packages of combination heater, temperature control and solar devices begins.


January 2020

Ukraine—Three new Technical Regulations Approved for Eco-design Requirements 

On December 13, 2019, the Cabinet of Ministers of Ukraine approved three technical regulations regarding the eco-design requirements for energy-consuming products. Following are the three approved regulations:

Technical Regulation on Eco-design Requirements for No-load Condition Electric Power Consumption and Average Active Efficiency of External Power Supplies: approved via Resolution #150 and based on the European Commission Regulation #278 and European Directive 2005/32/EC.


Technical Regulation on Eco-design Requirements for Household Washing Machines: approved via Resolution #738 and based on the European Commission Regulation #1015/2010 and European Directive 2009/125/EC.


Technical Regulation on Eco-design Requirements for Household Refrigerating Appliances: approved via Resolution #158 and based on the European Commission Regulation #643/2009 and European Directive 2005/32/EC.


April 2018

On April 1, 2018, new technical regulations for radio electronic devices came in force in Ukraine. These technical regulations are subject to the Decision № 355 “On approval of the Technical Regulations for Radio Equipment” (UA RED TR) applied by The Cabinet of Ministers of Ukraine dated 24.05.2017.


Any product approved using R&TTE documents will require a new approval by April of 2019 using RED documents (updated DoC and supporting test reports, etc.) as a basis for that approval.

There is a transition period from April 2018 to April 2019 where products approved on RTTE  supporting documents can be sold freely, but starting April 2019 all products must comply with RED TR in Ukraine.  This means a new approval, as stated above, using RED supporting documents must be submitted and completed by April 2019.

Ukraine is located in Eastern Europe.

​The current population as of 2024 is 38,289,702.

​The official language of Ukraine is Ukrainian, an East Slavic language of the Indo-European languages family. It is spoken regularly by 88% of Ukraine's population at home in their personal life, and as high as 87% at work or study. It is followed by Russian which is spoken by 34% in their personal life.




                                                                                

                                                                   Company                                           Services                                           News                                                 Contact 


                                                                   About Us                                            FCC Certification                               CSIA Blog                                          Request a Quote


                                                                   Worldwide Solutions                          CE Mark certification                         Worldwide Regulatory Overview       Company Contact Information    


                                                                   What you get with CSIA                     Countries  


                                                                   Code of Conduct                                Canada ISED


​​

Ukraine

Compliance Specialty International Associatess

Customs Solutions For Your Needs

Homologation in Ukraine
Radio type approval in Ukraine

Regulatory Updates for Ukraine

61535 SW Hwy 97

Suite 5635

Bend, Oregon 97702

503 482 9289




Ukraine UkrCEPRO label requirements:





​Requirements for product information:

  • the name of the product;

  • data on the main properties of the product, the nominal quantity (weight, volume, etc.), conditions of use;
  • the name and location of the manufacturer (the executor, the seller) – name, address, of producer  and name, address, country of factory,  and country of origin
  • the enterprise, which carries out its functions in accepting claims from the consumer, as well as carries out repairs and maintenance – name, address
  • date of manufacture;
  • the expiration date (term of service) of the goods (consequences of work), information about the necessary actions of the consumer after their termination, as well as about possible consequences in case of non-fulfillment of these actions;
  • warranty obligations of the manufacturer (executor);
  • information about the conditions of storage;
  • the rules and conditions for the effective and safe use of products;
  • information on the content of substances harmful to health, which are established by regulatory acts, and the precautionary statements regarding the use of a separate product, if such warnings are established by regulatory acts;
  • In the case of products which, under certain conditions, may be dangerous to life, health of the consumer and its property, the environment, the manufacturer (performer, seller) is obliged to bring to the attention of the consumer information about such products and the possible consequences of its consumption (use) .
  • For products, which are subject to mandatory certification in the state certification system, the consumer must be provided with information on its certification.


 With green color is marked information which should be on package, with black – may be on the package or in the manual. Sign shall be affixed to the product and / or to the label, packaging, and operational shipping documentation and more. Place and method of application (printing, sticking, engraving, etching, stamping, casting, etc.) mark of conformity is a producer of products. If it is impossible to affix marking to the product itself, it should be affixed to the smallest consumer packaging in which product is commercially available. 

UAE type approval

​CSIA can provide supporting services should your company not be able to meet country specific requirements such as a local representative, local certificate holder, translating documents into the native language, etc.

Contact  one of our friendly associates today, they are happy to assist you!


CSIA also offers FCC CertificationsCE CertificationsISED Canada.

Contact CSIA at (503) 482 9289 or  quotes@csiassoc.com

Type approval in Ukraine


UkrCEPRO (Ukrainian Centre for Certification of Products and Services) is an accreditation body in Ukraine responsible for certifying products, services, and systems to ensure they meet national and international safety, quality, and environmental standards. This certification is crucial for products and services in Ukraine, as it assures that they comply with established regulations and meet the necessary requirements for safety, reliability, and efficiency.

The UkrCEPRO approval typically involves:

Certification of products: Ensuring that products meet the regulatory standards and are safe for use

within the country and possibly for export.
Accreditation of quality management systems: Approving companies based on their adherence to

quality standards, often in alignment with ISO or other recognized frameworks.
Conformity assessment: This may include testing and evaluation to ensure compliance with technical

standards and laws.

UkrCEPRO is particularly relevant in sectors such as manufacturing, construction, food, medical

devices, and environmental management, as it ensures compliance with Ukrainian laws and

international standards. The approval process often involves product testing, factory inspections, and documentation review, leading to the issuance of a certification or approval that allows a product to be legally sold or used in Ukraine.     ​


  • Type approval in Ukraine requires acceptable CE reports and DoC issued under the RED Directives.
  • A RED Directive Risk Assessment may also be required from a qualified test lab to obtain this certification.
  • 1 sample may be required for in country testing, including all cables, adapters, software, etc. to put the equipment into test modes.
  • In some cases we may be able to obtain certification with CE reports and avoid testing. 
  • Lead time is approximately 6-7 weeks from the time all documents have been supplied.
  • UkrCEPRO certificate is valid indefinitely.

Frequencies allowed in Ukraine:


The 900 MHz frequency band is allowed in Ukraine and is actively used by mobile operators like Kyivstar, Vodafone Ukraine, and lifecell to expand their 4G LTE networks, particularly in rural areas, due to its ability to provide better coverage in remote regions.


2.4 GHz is allowed in Ukraine and is commonly used for Wi-Fi networks.


​The max output power for 5GHz is 200mW/1MHz.


Contact CSIA for more details on frequencies allowed in Ukraine.

Type approval in Ukraine
UkrCEPRO label

Ukraine Regulatory Approval Overview